Loading...
Serving Tulare, CA and surrounding areas. (559) 837-6805
Get your yard back. We build wood privacy fences that keep the neighbors out, the kids in, and hold up to Tulare summers and shifting clay soil for years to come.
Wood and privacy fence installation in Tulare means a professionally built barrier using cedar, redwood, or pressure-treated pine - posts anchored in concrete, rails and boards installed in one to two days, and a fence that gives you a genuinely private backyard instead of a yard everyone can see into.
Tulare homeowners ask us about wood fencing because they want something that looks natural and feels like a real upgrade to their property, not just a functional box checked. A six-foot cedar or redwood privacy fence does exactly that. It blocks the view from the street and neighboring yards, reduces road noise, and cuts the valley wind that makes summer afternoons uncomfortable on an open patio. If you are also considering a low-maintenance alternative on part of your property, vinyl fence installation is worth comparing side by side.
We handle the City of Tulare permit process, check HOA documents before ordering any materials, and set every post in concrete deep enough to stay straight through the seasonal soil movement this valley puts fences through every year.
If fence sections are tilting, or you can push on a panel and feel it move, the posts have likely shifted or rotted at the base. In Tulare's clay soil, this is common after several wet winters followed by dry summers, because the ground repeatedly expands and contracts around the post. A leaning fence is not just an eyesore - it is a safety concern if you have kids or pets in the yard.
Wood left unprotected in Tulare's intense summer sun dries out and breaks down faster than in milder climates. If you run your hand along the fence and feel rough, splintery wood, or you can see wide cracks running along the grain, the wood has lost its structural integrity. At that point, patching individual boards is usually a short-term fix - a full replacement will serve you better and cost less over time.
A privacy fence should block the view from the street or neighboring yards. If boards have shrunk, warped, or fallen off and you can see through the gaps, the fence is no longer doing its job. This is especially noticeable in summer when you want to use your backyard without feeling like you are on display.
California requires a fence or barrier around residential swimming pools, and Tulare enforces this requirement. Even without a pool, a new dog or young children are common reasons Tulare homeowners finally fence the yard. A properly installed privacy fence solves safety, containment, and privacy all at once.
We build wood privacy fences in three primary materials: cedar, redwood, and pressure-treated pine. Cedar and redwood are the strongest performers in the Central Valley because they naturally resist rot and insects and hold up better under intense UV exposure than pine. California-grown redwood in particular has a proven track record in this climate. For homeowners who want the natural look of wood and are comfortable with occasional staining every two to three years, cedar or redwood is the right choice. If you are also planning a deck or outdoor structure, ask about pairing your fence project with our screened-in porch and screened deck work for a fully integrated outdoor living space.
Pressure-treated pine costs less upfront and is a practical choice for homeowners who want a solid fence on a tighter budget. It requires more maintenance than cedar or redwood but still delivers years of reliable service when properly sealed at installation. All three wood options include our standard gate package - single walk gates and double drive gates are available, each built with a diagonal gate brace and heavy-duty hardware so the gate swings properly and stays square for the long haul.
Best for homeowners who want a natural look, good rot resistance, and a fence that takes stain or sealant well for long-term protection in Tulare's summer heat.
Suits homeowners who want California-grown material with outstanding natural rot and insect resistance, and a warm tone that weathers gracefully without paint.
Ideal for budget-conscious homeowners who need a solid, dependable privacy fence and are willing to maintain it with periodic sealing every few years.
Tulare's Central Valley climate is hard on wood. Summer temperatures regularly exceed 100 degrees, and UV exposure bleaches and dries out unprotected wood within a season or two. We account for this by recommending UV-resistant sealant applied at installation - not as an afterthought, but as part of the standard build. The clay-heavy soils under most Tulare lots add another layer of challenge: the ground swells in winter and shrinks in the dry summer, and that cycle stresses any post not set deep enough in concrete. We dig deeper than minimum guidelines and use a wider concrete footing around each post so the fence stays plumb through years of that seasonal movement. Homeowners in Kingsburg deal with the same soil and climate conditions, and we bring the same build standard to every project in the region.
Permit requirements and HOA rules are a real part of doing a fence job right in Tulare. The City of Tulare requires building permits for most fence installations above certain heights, and many of the newer subdivisions on the city's east and south sides have active HOAs with specific rules about materials, color, and fence height. We handle the permit application with the city's Building Division and ask about HOA documents before any materials are ordered. Homeowners in Visalia face similar processes, and navigating local requirements without surprises is something we do on every job we take on. Agricultural dust and wind are also real maintenance factors here - we design fences with a small gap at the base so boards do not sit in soil and trap moisture, which extends the life of the fence in this environment.
For wood species guidance specific to California's climate, the California Redwood Association is a helpful resource. For underground utility marking before any digging begins, visit DigAlert (California Underground Service Alert).
You reach out and we reply within one business day to schedule a property visit. We walk the fence line with you, take measurements, and ask about your goals and wood preference. You receive a written estimate that itemizes materials, labor, gates, and any permit fees - no verbal quotes, no guessing.
We submit the building permit application with the City of Tulare's Building Division on your behalf and check your HOA's governing documents before ordering any materials. This step adds a few days to the start date but protects you from fines or required removal later. You should not have to visit any city office yourself.
The crew arrives, marks post locations, digs holes, and sets each post in concrete. The concrete needs 24 to 48 hours to cure before rails and boards go on. On a standard backyard job, most of the fence boards go on the same day or the following morning. Keep kids and pets away from the work area throughout.
Before we leave, we walk the fence line with you - gates are tested, boards are checked for even spacing, and anything that looks off is fixed on the spot. We walk you through simple annual maintenance that adds years to the fence's life in Tulare's climate. Ask about the warranty on both labor and materials before you sign off.
No obligation, no pressure. We handle permits and HOA review as part of the job.
(559) 837-6805We dig deeper than minimum guidelines and use a wider concrete footing around every post because we know what Tulare's clay soil does to a fence over time. A post set correctly stays plumb through years of seasonal soil movement. A post set to minimum depth starts leaning within a few seasons. That difference is not visible at installation, but it is very visible a few years later.
We recommend cedar and redwood because they have a genuine track record in this climate - not because they are the most profitable option. For homeowners who choose pressure-treated pine for budget reasons, we apply sealant at installation to extend the fence's life in the valley sun. We will give you an honest comparison of all three materials before you decide.
The City of Tulare requires a building permit for most fence installations, and HOA rules add another layer in many neighborhoods. We handle the permit application and HOA review as a standard part of every job - not as an add-on. An unpermitted fence can complicate a home sale or result in a removal order. We make sure yours is done right the first time.
Your quote breaks down materials, labor, gate hardware, and permit fees as separate line items so you know exactly what you are paying for. Nothing is added after work begins. If scope changes - a longer run, an extra gate, an old fence removal we did not account for - you hear about it before any additional work is done, not on the final invoice.
We are a Tulare-based contractor who has worked in this valley long enough to understand what the climate, soil, and local regulations actually require. That local knowledge is built into how we design, price, and build every fence we install - and it is the reason our customers do not call us back to fix something that should not have been a problem.
To verify a contractor's license in California, use the California Contractors State License Board. For redwood species information and care guidance, the California Redwood Association is the authoritative source.
Extend your outdoor living season with a screened structure that keeps bugs and valley wind out while keeping your family comfortable.
Learn MoreCompare wood to vinyl for your project - vinyl requires no painting or staining and is a strong long-term option for Tulare's clay soil conditions.
Learn MoreSpring and early summer fill fast for fence work in the Central Valley - contact us today and we will get your written estimate on the calendar.